Publicidad
Step
Step 26
Refer to the enlarged diagram to identify the parts on the HINGES.
å
The DOORS may need some adjustments. Follow the text below to make
å
needed adjustments.
DOOR ADJUSTMENTS:
å
To adjust the DOORS from side to side (horizontal), loosen the mounting
å
screw several turns, then turn the adjusting screw in or out. Tighten the
mounting screw after making adjustments.
To adjust the DOORS up and down (vertical), loosen both vertical adjustment
å
screws. Move the DOORS up or down to the desired location. Tighten the
screws after making adjustments.
To adjust the DOORS in or out (depth), loosen the mounting screw one turn
å
and move the DOORS in or out, as needed. Tighten the mounting screw after
making adjustments.
www.sauder.com/services
Adjusting screw (horizontal)
417698
Mounting screw (depth)
(vertical adjustment)
Page 31
Publicidad
