Publicidad
Step 30
Step
Push the RUBBER SLEEVES (2R) over the METAL PINS (1R). Insert the METAL PINS into the hole locations of your
å
choice in the ENDS (C and D) and UPRIGHTS (E and F). Set the ADJUSTABLE SHELVES (W) onto the METAL PINS.
To insert the SLIDING SHELF (Y) into your unit, tip the front of the SHELF down and drop the rollers on the SHELF
å
behind the rollers on the unit. Lift the front of the SLIDING SHELF up and slide it into the unit.
NOTE: Please read the back pages of the instruction booklet for important safety information.
å
This completes assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry.
å
And to celebrate, why not share your success story?
W
1R
(8 used)
www.sauder.com/services
50 lbs.
total
25 lbs.
D
20 lbs.
Y
F
60 lbs.
total
2R
Place the roller on the SLIDE
behind the roller on the RAIL.
30 lbs.
total
W
E
25 lbs.
C
417698
Page 35
Publicidad
