Festo MH1 Serie Manual De Instrucciones página 13

1 User instructionsEnglish
The miniature valves type MH1..-PCB are intended exclus-
ively for controlling pneumatic actuators. When used to-
gether with commercially available components, such as
actuators, the specified limits for pressures, temperatures,
electrical data, torques etc. must be observed. National
and local safety regulations must also be observed.
Miniature valves may only be fitted by trained personnel.
Warning
S Before undertaking installation or maintenance work,
switch off the power supply for the valve solenoid
coils and the compressed air supply.
Please note
Commission only a miniature valve terminal which has
been fitted and wired completely.
Festo MH1..-PCB 0108NH English 13