Festo MH1 Serie Manual De Instrucciones página 18

5 Pneumatic connection of miniature valves
Connect the pneumatic supply and exhaust tubing to the
following ports:
Sub-base with ...
... 2/2-way valve, closed
... 3/2-way valve, closed
... 3/2-way valve, open
Please note
S If necessary, place a suitable seal under each screw
connector or silencer in order to avoid leakage.
S If elbow screw connectors or multiple distributors are
used, the airflow will be reduced slightly.
S Seal the unused pneumatic ports with blind plugs
(e.g. connection 3/11 if 2/2-way valves are fitted).
In this way, you can prevent dirt from entering the
pneumatic components and you will comply with
protection class IP40.
18
Compressed air Exhaust to
to connection: connection:
1 3
1 3
11 33
Festo MH1..-PCB 0108NH English