About This Document; On Safety; Product Description - SICK C2000 RES Instrucciones De Operación

GB
Chapter 1
1

About this document

Note
2

On safety

3

Product description

Note
28
© SICK AG • Industrial Safety Systems • Germany • All rights reserved
About this document
This document is an original document.
This addendum only applies
to the C2000 RES/EDM safety light curtain with one of the following entries on the type
label in the Operating Instructions field:
– 8011906
– 8011906/TI60
in conjunction with the original operating instructions "C2000 Safety Light Curtain"
(SICK part number 8009140).
If not otherwise revised in this document, the information in the original operating
instructions applies, which relate to the C2000 Standard safety light curtain.
When using the C2000 RES/EDM safety light curtain, observe the following notes in
addition to the information in the operating instructions for the C2000 safety light
curtain.
The C2000 RES/EDM safety light curtain, as a member of the C2000 product family,
complies with the requirements in accordance with EN 61 496<1, type 2.
This chapter provides information on the special features and properties of the C2000
RES/EDM safety light curtain. It also describes the properties and functions that differ
from the C2000 Standard.
Please read this chapter before mounting, installing and commissioning the device.
The following list contains information only concerning the C2000 RES/EDM safety light
curtain that is not already given in the original operating instructions.
protective field height: 300-1200 mm
scanning range: 0 ... 6 m
no beam coding
Reset function integrated via system plug M12; as a result the RES expansion socket
for the receiver is no longer required (see "C2000 Safety Light Curtain" operating
instructions, chapter 5.3).
reset function cannot be de-activated
resolution: 20, 30 or 40 mm
Addendum Operating Instructions
C2000 RES/EDM
8011906/TI60/2010-02-12
Subject to change without notice