Elephone Operation; Indicator; Calls; Aking Alls - GE 21028 Guia Del Usuario

7. Use the touch-tone pad to select 1YES or 2NO , or use the CID/VOL (
button to move the cursor to 1YES or 2NO . 2NO is the default setting.
NOTE: If you choose "YES" all the settings in the programmable menu are
returned to factory default setting.
8. Press the MUTE/PROG button to save your selection. You will hear a
confirmation tone.
T O
ELEPHONE
C I
HARGE NDICATOR
When the in use/charging indicator on the base or the charge indicator
on the extra charger is lit, the handset is correctly seated in the cradle
and is charging.
M C
AKING ALLS
1. Pick up the handset, and press the TALK/END/CALLBACK button.
Listen for a dial tone.
2. Dial the number you want to call, or dial the number first then press the
TALK/END/CALLBACK button.
3. When finished, press the TALK/END/CALLBACK button to hang up.
A C
NSWERING ALLS
1. When the phone rings, pick up the handset, and press the TALK/END/
CALLBACK button.
2. When finished, press TALK/END/CALLBACK to hang up.
NOTE: Adjust the handset volume by pressing the CID/VOL (
button during a call.
S

PEAKERPHONE

A C

NSWERING A

1. When the phone rings, press the SPKR button on the handset.
2. When finished, press the SPKR button again to hang up.
M C
AKING A

ALL WITH

1. Make sure the phone is OFF (not in talk mode).
PERATION
O
PERATION
S
ALL WITH PEAKERPHONE
S
PEAKERPHONE
or )
or )
29