Transferring External; Handsets; Memory - GE 21028 Guia Del Usuario

2. Use the touch-tone pad to select Handset 1 or Handset 2. You will hear a
paging tone and PAGING shows in the originating handset's display.
NOTE: "PAGING FROM..." shows in the display on the receiving handset, and
the receiving handset presses the PAGE/INT or TALK/END/CALLBACK
button to answer the intercom.
3. When the receiving handset connects, press the FORMAT/CONF button
on the originating handset to conference with the receiving handset and
the external caller. CONFERENCE shows in the display on the
originating and receiving handsets.
NOTE: A handset can enter conference directly by pressing TALK/END/
CALLBACK while another handset is talking on an external call.
T E
RANSFERRING
During an external call, you may transfer the external call to another handset.
1. Press the PAGE/INT button on the originating handset to put an external
call on hold, and then page the receiving handset.
2. Use the touch-tone pad on the handset to select the receiving handset.
You will hear a paging tone. PAGING shows on the originating handset's
display, and PAGING FROM . . . shows on the receiving handset's display.
3. When the receiving handset connects, press the TALK/END/CALLBACK
button on the originating handset to transfer the call.
-OR-
Press the TALK/END/CALLBACK button on the originating handset to
transfer the call. If the receiving handset does not answer within 30
seconds, the originating handset rings back and displays CALLBACK . If
the originating handset does not answer within 20 seconds, the call is
automatically dropped.
M
EMORY
You may store fifty 15-character names and 20-digit telephone numbers in
the handset memory.
C
XTERNAL ALLS TO
O H
THER ANDSETS
35