Metra 99-6526 Instrucciones De Instalación página 3

3. Remove the (4) Phillips screws
securing the radio, then unplug
and remove the radio. (Figure C)
4. Open the pocket door at the top of
the dash, remove the rubber liner,
and then remove the (1) Phillips
screw exposed.
5. Remove the metal radio
support bracket:
a. Remove the (2) 10mm bolts
visible from the front. (Figure D)
b. From the inside of the radio
cavity, remove (2) Phillips
screws using a short stubby
Phillips screwdriver. (Figure D)
c. Remove the support from the
radio cavity.
Continue to Kit Preparation
Dash Disassembly
(Figure C)
99-6526
(Figure D)
3