Singer SWP SMART Folleto De Instrucciones página 17

space to avoid falls, and far from other heat sources, far from flammable materials
(curtains, liquids, gas cylinders, etc.), and far from tanks of liquids.
• The power socket must not be above or below the appliance, it must be easily
accessible so that the plug can be removed easily in an emergency.
• After use and once fully cooled, the appliance can be stored either on a horizontal
support surface or vertically on a wall using the dedicated key slot (install on wall), or
handing using the hook at the end (hand steaming): when choosing, also consider
the necessary space required. Use of the slot requires a suitable
Ø4.2mm screw, Ø8.2mm cylindrical
head, long enough for the head to
extend 18mm from the wall, and for
the screwed in part to support at least
9 kg without the corresponding hole
become deformed
coming out. If using the hook, it must
hang on a round cross-section bar
(Ø45mm max) and must support a
weight of at least 7 kg.
DESCRIPTION
The appliance consists of the parts indicated in Fig. 1 and described here:
No. Description
1 Base
2 Insulating pads
3 Iron seat
4 Fixing clip
6 Tank
7 Steam cord
8 Iron plate
or the screw
17
No. Description
9 LED indicator light
10 Steam button
11 Handle
12 Cord Winder
13 Scratch-proof pads
14 Power cord
15 Brush
16 Hook for hanging