Leister TRIAC AT Manual De Instrucciones página 21

Please read operating instructions carefully before useand
keep for future referen
Warning
DANGER! Danger when opening up the tool, as live components and connections
are exposed. Therefore, before opening it, unplug the tool to ensure disconnec-
tion from the mains.
Incorrect use of the hand extruder (eg overheating of the material) can pre-
sent a fire and explosion hazard, especially near combus t ible materials
and explosive gases.
Do not touch the element housing, air nozzle and discharging plasti-
zised material when they are hot as they can cause burns. Let the tool
cool down. Do not point the hot air flow and the discharg ing plastizised
material in the direction of people or animals.
Caution
120
The voltage rating stated on the tool must correspond to the mains voltage.
230
For personal protection on building sites we strongly recommend the tool
FI
be connected to a RCCB (Residual Current Circuit Breaker) .
The tool must be operated under supervision. Heat can ignite flammable
materials which are not in view.The machine may only be used by qua-
lified specialists or under their supervision. Children are not authorized
to use this machine.
Protect tool from damp and wet.
Repairs should only be carried out by authorized Leister service points.
Restricted to use with original Leister accessories and replacement parts.
Translation of the Original User Manual Translation of the Original User Manual Translation of the Original User Manual
Warranty
• For this tool, the guarantee or warranty rights granted by the relevant distri-
butor/seller shall apply. In case of guarantee or warranty claims any manu-
facturing or workmanship defects will either be repaired or replaced by the
distributor at its discretion. Warranty or guarantee rights have to be verified by
an invoice or a delivery document. Heating elements shall be excluded from
warranty or guarantee.
• Additional guarantee or warranty claims shall be excluded, subject to mandato-
ry provisions of law.
• Warranty or guarantee shall not apply to defects caused by normal wear and
tear, overload or improper handling.
• Warranty or guarantee claims will be rejected for tools that have been altered
or changed by the purchaser.
Conformity
Leister Technologies AG, Galileo-Strasse 10, 6056 Kaegiswil/Switzer-
land, confirms that this product, in the version as brought into circulation
through us, fulfils the requirements of the following EC directives.
Directives:
Harmonized Standards:
Kaegiswil, 25.09.2014
Bruno von Wyl, CTO
Disposal
2006/42, 2004/108, 2006/95, 2011/65
EN 12100, EN 55014-1, EN 55014-2, EN 61000-6-2,
EN 61000-3-2, EN 61000-3-3, EN 62233,
EN 60335-2-45, EN 50581
Power tools, accessories and packaging should be sorted for environmental-fri-
endly recycling. Only for EC countries: Do not dispose of power tools into
household waste! According to the European Directive 2002/96/EC on waste
electrical and electronic equipment and its incorporation into national law, power
tools that are no longer suitable for use must be separately collected and sent for
recovery in an environmental-friendly manner.
Deutsch Deutsch Deutsch
English English English
Français
Español
Português
Italiano
Nederland
Dansk
Svenska
Norsk
Suomi
Eλληνικά
Türkçe
Polski
Magyar
Cesky
Slovensky
Românã
Slovensko
Andreas Kathriner, GM
Български
Eesti
Lietuviu
Latviešu
Русский
21 21