Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Assembling Fan Without the Light Kit
1. Disassemble the adapter/switch cup assembly from
the switch cup support plate by removing three
screws. (Figure 1)
2. Remove one of the three screws in the support
bracket at the bottom of the motor assembly.
Slightly loosen the remaining two screws. Assemble
the switch cup support plate to the support bracket
using the two key slots in the socket plate. Replace
the third screw and securely tighten all three screws.
(Figure 2)
3. Remove the hex nut and spring washer from the
adapter/switch cup assembly. (Figrue 3)
4.
T
g i
h
e t
n
h t
e
c s
e r
w
n i
o t
(Figure 4)
5.
A
s s
e
m
b
e l
h t
e
c
o
v
r e
s
switch cup support plate with three screws.
(Figure 5)
h t
e
c
o
v
r e
s
w
c t i
h
c
u
. p
w
c t i
h
c
u
p
o
n
o t
h t
e
a
s s
e
Switch cup support
plate
m
b
e l
d
Cover Switch
cup
15
Adapter/Switch cup
assembly
Figure 1
Figure 2
Hex Nut
Spring Washer
Adapter Switch cup
assembly
Figure 3
Figure 4
HARDWARE USED:
PHILLIPS SCREW
Figure 5
Switch cup
support plate
Cover Switch
cup
x 1
Publicidad
Capítulos
Tabla de contenido
Solución de problemas
