Troubleshooting - Klarstein MAXFRESH Manual De Instrucciones

EN
20

TROUBLESHOOTING

Error Possible cause
No air flow No power.
The device is not switched
on.
The device is damaged.
The device cannot The switch is broken.
be switched on.
The internal connection
cable is loose.
The device cannot The device is broken.
be switched off.
Abnormal noise Foreign body in the device.
A slat is loose.
The motor is broken.
Problem with The water filter is clogged.
humidification and
cooling.
The water pump is broken.
The fins do not The sync motor is broken.
vibrate.
The water pump is No water in the tank or the
very noisy. water level is too low.
The water pump is broken.
Solution
Plug in the connector.
Switch on the device with
the ON/OFF key.
Contact the manufacturer.
Contact the manufacturer.
Contact the manufacturer.
Remove all foreign objects.
Contact the manufacturer.
Contact the manufacturer.
Clean the water pump and
the tank.
Contact the manufacturer.
Contact the manufacturer.
Switch off the device and
refill the water.
Contact the manufacturer.