Verify Product Setup - HP LaserJet 9000 Manual Del Usuario

Step 16 Verify product setup
To verify that the product has been set up correctly to copy, send, and
print, follow the steps below.
To verify copying
1
2
If the document does not copy correctly, check your product
installation. For additional information, see the online use guide at
http://www.hp.com/support/lj9000.
To verify sending
1
2
Note If you cannot gain access to Send Options, check your product
installation and configuration. For additional information, see the online
use guide.
3
4
5
6
7
The product sends the document to you as an e-mail attachment.
If the document does not send correctly, check your product
installation and configuration. For additional information, see the
online use guide.
34 Product Setup
Place a one-page document face down on the glass.
Press S .
TART
Place a one-page document face down on the glass.
On the touch screen of the graphical display, touch Send
Options.
Touch From: and then enter your name using the touch screen
keyboard.
Touch OK.
Touch To: and then enter your own e-mail address.
Touch OK.
Press S .
TART
ENWW