Maintenance / Recommendations; Product Identification; Product Specifications - GYS POWERDUCTION 110LG Manual De Instrucciones

Translation of the original instructions

MAINTENANCE / RECOMMENDATIONS

• Maintenance should only be carried out by a qualified person. A yearly maintenance is recommended.
• Warning ! Always disconnect from the mains before performing maintenance on the device. High Voltage and currents inside
the machine.
• Remove the casing on a regular basis, to remove any excess dust. Take this opportunity to have the electrical connections
checked by a qualified person, using an insulated tool.
• Do not use solvents or any agressive cleaning products.
• Clean the device's surfaces with a dry cloth.
• If the power cable or connection cables are damaged, they must be replaced by the manufacturer, its after sales service or an equally qualified
person to prevent danger.
• If the internal fuse is melted, it must be replaced by the manufacturer, its after-sales service or by an equally qualified person to prevent any
accidents.»
• Do not obstruct the machine's air intake, which facilitates air circulation. Check the installation chapter before using the device.
• Maintain at least 50 cm of free space around the equipment.
TRANSPORT
• Do not use the power cable or nozzle to move the unit. It must be moved in a vertical position.
• The handle cannot be used to lift the product.
REGULATIONS
• The device complies with the European directives,
• The declaration of conformity is available on our website (see cover page).
• EAC conformity mark (Eurasian Economic Commission)
• Material conforms to UK requirements.
• The UK Declaration of Conformity is available on our website (see cover page).
• Device compliant with Moroccan standards.
• The C‫( م‬CMIM) declaration of conformity is available on our website.
WASTE MANAGEMENT
• This product should be disposed of in an appropriate recycling facility. Do not throw away in a household bin.
• This product should be recycled appropriately
• Recyclable product that falls within waste sorting recommendations

PRODUCT IDENTIFICATION

At the back of the product, there is an identification plate that contains the following information:
• Name and address of the manufacturer
• Date of manufacture
• Model
• Product Type
• Operating Voltage
This data must be specified for each maintenance intervention, or if spare parts are requested.

PRODUCT SPECIFICATIONS

Rated input voltage
Rated frequency
Number of conductors
Rated input current
Rated input power
Processing frequency
Rated output power
Length of power cable
Length of lance
Tank capacity
Coolant
POWERDUCTION 110LG / 160LG / 220LG
110LG
208-240 V
32 A
11 000 W
5 500 W
5 m
4 m
7 litres
160LG
400 V 208-240 V
50 Hz - 60 Hz
3 Phases + Ground
16 A 45 A
16 000 W
20-60 kHz
microprocessor controlled.
8 000 W
Special welding liquid coolant (ref. 052246)
EN
220LG
400 V
29 A 32 A
22 000 W
11 000 W
4 m
6 m
30 litres
25