Before First Use; Preliminary Cleaning; Place Of Installation - essentiel b ERLVI 180-55b1 Manual De Utilización

before first use

Unpacking
• Remove the shipping box.
• Check that the appliance has not been damaged during transport. Do not plug in a
damaged appliance under any circumstances! If the appliance is damaged, please contact
your retailer.
• Remove all tape and packaging material on the inside and outside of the appliance.

Preliminary cleaning

• Clean the inside of the appliance with lukewarm water with a little white wine vinegar added
to it. Do not use soap or detergent as the odour may linger. After cleaning, completely dry
the appliance.
• You can use white spirit to remove any remaining adhesive from the outside of the appliance.
• To clean the appliance, always turn it off and unplug it, or remove the fuses or turn off the
circuit breaker.
installation

Place of installation

To avoid any risk due to the instability of the appliance, it must be secured as per
the instructions.
• Place your refrigerator on a stable, level surface.
• The appliance must be installed in a dry, well-ventilated room.
• The appliance's energy consumption and efficient operation are affected by the room
temperature.
• Your appliance will be heavy when loaded with food: it must, therefore, be placed on a
strong, solid floor.
• Avoid placing the refrigerator in a location with high humidity to minimise the possibility of
any metal parts rusting. Avoid splashing water on the unit to avoid the risk of a short circuit.
• Avoid placing your refrigerator close to any combustible substances such as gas, petrol,
alcohol, hairspray, etc. These products cannot be stored in the refrigerator.
• The appliance must be installed in such a way that the socket is accessible.
21
V.1.0
installation