essentiel b ERLVI 180-55b1 Manual De Utilización página 24

5. Tilt the appliance (up to 40°) so that there is enough space to access the lower hinge
(fig. 2).
6. Use a screwdriver to unscrew this hinge.
7. Remove the screw covers and place them where the hinges used to be.
8. Attach the upper right hinge to the bottom left (fig. 3).
9. Position the door so that the bottom hinge pin is aligned with the hole in the bottom door
bracket.
10. Attach the top hinge so that the hinge pin is aligned with the corresponding hole in the
top door bracket. (fig. 4).
11. Check that the doors are aligned with the body of the appliance.
12. Replace the hinge covers. Switch on the appliance as described in the relevant section
of the user manual.
24
V.1.0
installation
Fig. 2
Fig. 3
Fig. 4