Temperature Indicator - essentiel b ERLVI 180-55b1 Manual De Utilización

7. Control panel and schematic diagram of the electronic panel.
• Initially, set the thermostat to position 4 for normal, daily use.
• The temperature inside the appliance is a function of several factors, such as the room
temperature, the quantity of food stored, the frequency of the door opening, etc.
Note: when the thermostat is set to 1, you may hear the compressor running more often.

Temperature indicator

The pictogram opposite indicates the location of the coldest zone
of your refrigerator, whose temperature is less than or equal to 4°C.
This zone is located at the top of the unit (in zone 1).
For proper food storage in your refrigerator and in
particular in the coldest zone, make sure that "OK"
appears in the temperature indicator.
If "OK" does not appear, the zone's average temperature is too high. Set the thermostat to a
lower temperature.
Whenever you change the thermostat, wait for the temperature inside the appliance to
stabilise before adjusting it again, if necessary. Only change the position of the thermostat
gradually and wait at least 12 hours before checking again and possibly changing it.
Note: After loading the appliance with fresh food or after opening the door repeatedly (or
leaving it open for a prolonged period), it is normal if the word "OK" does not appear in the
temperature indicator; wait at least 12 hours before readjusting the thermostat.
If the evaporator in the refrigerator (back wall of the appliance) becomes abnormally frost-
covered (appliance overloaded, high room temperature, low thermostat setting, frequent
door openings), turn the thermostat up until the compressor stops running periodically again.
The refrigerator will only automatically defrost if the compressor stops intermittently.
30
V.1.0
use
Set your thermostat
OK
Correct temperature