Control Panel; Using The Blender - Cuisinart BFP603E Manual De Instrucciones

Ocultar thumbs Ver también para BFP603E:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 81
D. Control panel
ON/OFF
For whipping
For mixing
For crushing ice
For operating in short bursts
I.
,
and
speed settings
Press the
switch. The indicator light above the
switch will begin to fl ash to show that the appliance
is in 'stand-by' mode.
Select the
,
or
activate the appliance.
The corresponding indicator light will illuminate
while the blender is running.
You can change the speed while the blender is
running. Simply press the desired speed button.
To pause while blending, press the speed button
currently in use.
To stop the blender, press the
II. The
Button
This function lets you use short bursts of power for
more accurate results.
To use this function, press the
indicator light will begin to fl ash to show that the
appliance is now in 'stand-by' mode. Press the
button, a light will illuminate to indicate that this
26
E. Using the blender
CAUTION: be very careful when handling the sharp
accessories.
CAUTION: the total quantity of ingredients (liquids and
solids) may not exceed 1.75L.
speed and press once to
button.
switch. The
CAUTION: Never put your hands in the jar when the
blender is plugged in.
function has been activated.
Press then release the button that corresponds to
the selected speed (
,
or
as desired.
We recommend you carefully wash all the accessories
and bowls before using for the fi rst time.
Place the motor housing on a fl at surface.
Assemble the jar (see section 2B) and place it on the
motor housing.
Place all the ingredients your recipe calls for in the
jar and replace the lid. It is possible to add other
ingredients during the mixing. To do so, remove the
measuring cap and pour the ingredients through the
opening. Replace the measuring cap in the lid after
adding the ingredients.
Press the
switch.
Select the desired speed (
It is also possible to blend using the pulse mode. To
do so, press the
button then press and release
the button corresponding to the desired speed
making sure that the food falls back to the bottom of
the jar after each pulse.
Do not blend the ingredients for too long. Generally,
this appliance lets you achieve the desired results in
just a few seconds.
When your preparation is ready, press the
and unplug the appliance from the mains.
Never place ice, frozen food or very cold liquids
). Repeat as often
,
,
).
switch

Publicidad

Tabla de contenido
loading

Tabla de contenido