Control Panel - Cuisinart CBT700E Manual De Instrucciones

appliance correctly for proper operation.
C. Control Panel
1.
2.
3.
6.
7.
1. On/Off
2. HIGH: Beat
3. Display of preparation time
4. LOW: Mix
5. Pulse
6. Smoothie: Fruit juices & smoothies
7. Crushed ice
8. Soups & sauces: Liquid preparations
9. Purée: Thick preparations
1 and speed settings
• Press . A fl ashing light will come on indicating
that the unit is in 'standby' mode.
• Depending on the speed desired, press
once to start the appliance. The corresponding light
will come on while the blender is running. A timer will
also start and the operation time will appear in the
appliance's digital display.
N.B. The preparation time is programmed for 1
minute
• It is possible to change the speed while the blender is
running. Simply press on the desired button.
• To stop the blender while it is running, press the
• To stop the blender press
5.
4.
N.B. When the jar is removed from the base, the
9.
8.
appliance shuts off and the timer is reset to 0:00.
2. The
This function lets you blend using short bursts for more
precise
results.
• To use this function, press
• Press and hold the button corresponding to the speed
N.B. The timer indicates the duration during which
the
or
down when the
used with
• The pulses should be very short bursts. Pause the
• The
button that corresponds to the speed being used.
The timer will stop counting down and will start again
when another speed is selected.
counting down and the display is reset to '0:00' When
the blender is started again and a speed is selected,
the timer starts counting down again from 0:00. Press
. once. The fl ashing light located next to
goes out automatically which indicates the blender
has been turned off .
button
button will begin to fl ash which indicates that the
appliance is in 'standby' mode. Press
around the button will start to fl ash which indicates
this function is activated.
desired , the unit will stop operation once the speed
desired button is released. Repeat as often as desired.
is held down. The timer stops counting
is released. The
, , ,
blending long enough to allow the blade to stop
turning.
can be used to chop larger pieces of food
or to check the texture of a preparation. This function
is particularly useful when you want to blend with
precision.
. The timer will stop
. A light around the
, the light
can be
.
17