Kohler STERLING 6105 Serie Guia De Instalacion página 7

3. Install the Rough Plumbing
NOTE: Provide access to all plumbing connections to simplify further maintenance.
NOTE: The drain line should be located before the unit is installed. The overflow and drain must be
installed according to the manufacturer's instructions. Locate the drain line and trap using the dimensions
given in the "Roughing-In" section of this guide.
Locate the rough plumbing for the drain according to the roughing-in dimensions.
NOTE: If plumbing will be installed on the unfinished stud wall, install the supplies after the bath is
installed.
Position the plumbing according to the roughing-in information. Cap the supplies and check for
leaks.
Strap the supply connections to the stud framing.
Provide an access at the back of the plumbing wall for servicing the supply and waste piping, if
possible.
Install the shower valving according to the manufacturer's instructions. Do not install the trim at
this time.
Sterling
Shower Elbow
Blocking
Shower Riser
Supply Valves
Blocking
Spout Elbow
Supply Lines
Drain Cutout
21"
(53.3 cm)
Series 6105
20"
(50.8 cm)
Min
Optional
10"
(25.4 cm)
7
Optional
1019810-2-C