Tripp-Lite SmartOnline SU10KRT3U El Manual Del Propietario página 4

Mounting (Tower)
Mount all modules in an upright, tower position using the included base stands. The user must determine the fitness of hardware and
procedures before mounting.
1
The UPS system is shipped with base stands
to tower mount the UPS power module, battery module and transformer module.
Adjust the stands to a width of 15.375 inches (39 cm) for three modules. Align the
feet approximately 10 inches (26 cm) apart. Have one or more assistants help place
the modules on their sides within the base stands. The control panel of the UPS
should be nearer the top of the UPS system and facing outward. Note: Place the
transformer module between the power module and the battery module.
Rotate the power module's control panel for easy viewing while the UPS system is
2
tower mounted. Insert a small screwdriver (or other tool) in the slots on either side
of the control panel. Pop the panel out, rotate it and pop it back into place.
201102089 93-2982.indb 4
A B
and extensions that can be used
4
A
1
2
B
7/11/2011 3:48:52 PM