Intended Use - WIKA R74.100 Información Adicional

1. Safety

1.2 Intended use

These thermometers are suitable for temperature measurement for
industrial applications in hazardous areas.
The instruments have been designed and built solely for the intended
use described here, and may only be used accordingly.
Check whether the classification is suitable for the application (see Ex
marking, chapter 1.5 "Labelling, safety marks"). Observe the relevant
national regulations.
The non-observance of the instructions for use in hazardous areas can
lead to the loss of the explosion protection. Adhere to the following limit
values and instructions (see data sheet).
The manufacturer shall not be liable for claims of any type based on
operation contrary to the intended use.
1.3 Responsibility of the operator
The responsibility for classification of zones lies with the plant operator
and not the manufacturer/supplier of the equipment.
1.4 Personnel qualification
The skilled personnel must have knowledge of ignition protection types,
regulations and provisions for equipment in hazardous areas.
WIKA additional information models 73, 74 (ATEX)
EN
5