Brew Group (F. 2); Cappuccinatore Group (F. 4); Safety Devices; Hot Water And Steam Spouts - Saeco IDEA Manual De Uso Y Mantenimiento

English
8.4 Brew group
The position of this group (22) can be adjusted according to the
height of the container used .
It is possible to position the brew group on the top or on the bottom.
Many brewing heights can be thus obtained.
F. 3
8.5

Cappuccinatore Group (F. 4)

The cappuccinatore group, is composed of:
- milk suction tube (30);
- spout clamp (10);
- cappuccinatore group(29);
- cream quality adjustment (24);
- temperature setting (25);
- Milk dispenser (26).
F. 4
152

9 - SAFETY DEVICES

NOTE - The machines described in this brochure are in conformity
with the specific current European Regulations and
therefore all their potentially dangerous parts are
protected .
• Any overpressure in the water plant that produces steam
and hot water, is detected by 3 safety valves.
• A thermostat avoids boilers overheating.
• The position of the dump box (16) and of the door (15), is
controlled by two microswitches that stop the running of the
machine if one of the two components is not properly in place;
(the display will show the component out of place).
• An electrical pulse counter and a mechanical one, record
the number or brewings and allow to schedule the routine
maintenance.
9.1

Hot water and steam spouts

(except COFFEE set-up) (F. 1)
Steam spouts (17) and hot water spouts (11) are equipped with
special rubber protectors (9 and 14) so that they can be grabbed
and adjusted even when hot.
9.2

Residual risks

• The structural characteristics of the machines described in this
brochure, do not protect the user from the direct steam or hot
water spouts (except COFFEE set-up).
• Danger of burns – During hot water and steam
brewing do not turn the spouts towards yourself or someone
else. Grab the spout only by the respective anti-burns protectors
(9 - 14).
Do not use containers that are not made of food materials.