SMA Sunny Tripower 15000TL Instrucciones Para La Sustitución página 14

5 Disconnecting the Inverter from Voltage Sources
7. Pull the DC load-break switch out in a downward
direction.
8. Unscrew all 6 screws from the lower enclosure lid
(hex socket, AF3).
9. Lift and remove the lower enclosure lid from below.
10.
Risk of burns when touching the DC protective cover
The DC protective cover can get hot during operation.
• Do not touch the DC protective cover.
11. Note the position of the DC connector in order to be able to connect it again later in the same
position.
14 STPTLEE-STPTL-10-BPDCLS-RM-xx-10
CAUTION
SMA Solar Technology AG
Replacement Manual