Remove Mounting Plate Of Dc Load-Break Switch - SMA Sunny Tripower 15000TL Instrucciones Para La Sustitución

SMA Solar Technology AG
21.
Damage to the inverter due to electrostatic discharge
Touching electronic components can cause damage to or destroy the inverter through
electrostatic discharge.
• Ground yourself before touching any component.
6

Remove Mounting Plate of DC Load-Break Switch

1. Disconnect the inverter from all voltage sources and discharge (see Section 5, page 13).
2. If the DC protective cover has not been removed
yet, remove it. To do so, release all 4 screws from
the DC protective cover (hex socket, AF3) and
remove it.
3. Remove the clamping brackets.
4. Only with 15000TLEE / 20000TLEE: Remove DC
switching unit from the enclosure. To do this,
unscrew the fastening screw (TX 20) and dispose it.
Replacement Manual
6 Remove Mounting Plate of DC Load-Break Switch
NOTICE
STPTLEE-STPTL-10-BPDCLS-RM-xx-10 21