Iso Din Radio Provision With Pocket - Metra 99-6513B Instrucciones De Instalación

Kit Assembly 99-6513B

ISO DIN radio provision with pocket

1. Mount the ISO brackets to the head
unit with the screws supplied with
the unit. (Figure A)
2. Slide the head unit into the radio
opening until the side clips engage.
(Figure B)
3. Snap the trim plate into the radio
housing. (Figure B)
4. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the unit for proper operation.
5. Reassemble dash in reverse order
of disassembly.
(Figure A)
(Figure B)
3
Notes