Iso Din Radio Provision With Pocket - Metra 99-7879 Instrucciones De Instalación

Kit preparation
Red factory clip
White
plastic
clips
Metal clip
(Figure A)
Kit Assembly 99-7879
Hazard switch
Air bag light

ISO DIN radio provision with pocket

1. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the unit for proper operation.
2. Align the holes in the radio housing
brackets with the holes in the
ISO DIN Head Unit and secure the
brackets to the head unit with the
screws included with the unit.
(Figure B)
3. Attach the pocket to the bracket/
radio housing assembly with the
four #8 x 3/8" Phillips screws
provided. (Figure B)
White
4. Secure the radio housing brackets
plastic
clips to the radio housing with four #8
x 3/8" Phillips screws provided.
(Figure C)
5. Reassemble dash in reverse order
of disassembly using the supplied
#8 screw in place of the factory
screw removed in step one,
(Figure B) of the dash disassembly.
3
(Figure A)
(Figure B)