Fairlight Panel Setup - Blackmagic Design Fairlight Manual De Instrucciones

The full studio version of DaVinci Resolve can be installed from the SD card included
with your Fairlight Console, but we recommend downloading the latest version from the
Blackmagic Design Support Center at www.blackmagicdesign.com/support.
To install DaVinci Resolve, launch the DaVinci Resolve installer and follow the onscreen
prompts. Be sure to select the 'Fairlight Studio Utility' when installing DaVinci Resolve.

Fairlight Panel Setup

Fairlight Panel Setup can be connected to the Fairlight module via USB or Ethernet using DHCP.
If you are not using a DHCP server, you can set the network settings to a fixed IP address via
USB. More information for changing network settings is provided later in this manual.
When configuring the Fairlight console for your studio, the first step is to name each module
using the Fairlight Panel Setup utility. This lets you easily identify each panel module by clicking
on the 'identify this panel' checkbox.
To name each module:
1 Launch the Fairlight Panel Setup utility.
The currently selected module will be visible on the setup
utility home screen. Navigate to each installed unit by
clicking on the arrows on each side of the home screen
2 Select a module on the home screen and click on the settings icon. You can also click
on the module's image to open the settings window.
3 Click on the 'configure' tab. Under 'panel name' you will see a 'set label to' text box.
Change the name in the text box and click 'save'. You can visually identify each module
installed in your console by clicking on the 'identify this panel' checkbox. This will
illuminate features on the module.
Configuring the Fairlight Modules 19