Blackmagic Design Fairlight Manual De Instrucciones página 23

Each module can be identified by the custom name you entered when labeling the
modules. You can also click on the light bulb icon for each module to visually identify it.
When clicking on the light bulb, features will illuminate on the relevant module.
Click on the light bulb icon to identify each module in your Fairlight console
4 Click 'add'.
The monitor will be assigned to the top left slot on your Fairlight console. You can now
follow the same procedure to assign all the other panels to the corresponding
positions in the configuration utility. If you select the wrong module by mistake, all you
need to do is click on the module in the group to reveal its options and then click on
the 'X' icon to remove it.
As you configure each module, you can confirm it corresponds to the correct position
in the console by clicking on the module in the group to reveal its options and then
clicking on the light bulb icon.
Your Fairlight console is now configured as a studio and you can change the name of
the studio by clicking in the 'untitled studio' text box, typing a new name, and pressing
the 'return' key to confirm. This makes it easier to identify each studio if you have
multiple studios installed in your facility.
Rename the newly configured studio by clicking in the studio name,
typing a new one, then pressing the 'return' key to confirm the change
Configuring the Fairlight Modules 23