Optional Accessories - Makita GA5080 Manual De Instrucciones

Air vent cleaning
The tool and its air vents have to be kept clean.
Regularly clean the tool's air vents or whenever the
vents start to become obstructed.
► Fig.25: 1. Exhaust vent 2. Inhalation vent

OPTIONAL ACCESSORIES

CAUTION:
These accessories or attachments are recommended for use with your Makita tool spec-
ified in this manual. The use of any other accessories or attachments might present a risk of injury to persons.
Only use accessory or attachment for its stated purpose.
CAUTION:
Your tool is supplied with a guard for use with any recommended grinding wheel, flap disc
and wire wheel brush. If a diamond wheel and/or cut-off wheel are also available for use with the tool, they
should only be used with the appropriate optional guard for cut-off wheels.
If you decide to use your Makita grinder with approved accessories which you purchase from your Makita distribu-
tor or factory service center, be sure to obtain and use all necessary fasteners and guards as recommended in this
manual. Your failure to do so could result in personal injury to you and others.
If you need any assistance for more details regarding these accessories, ask your local Makita Service Center.
► Fig.26
1
2
3
4
5
6
7
8
-
NOTE: Some items in the list may be included in the tool package as standard accessories. They may differ from
country to country.
Vibration proof grip
Wheel Guard (for grinding, sanding and brushing)
Wheel Guard (for cut-off wheel)
Depressed center wheel / Flap disc
Wire wheel brush
Wire cup brush
Abrasive cut-off wheel / Diamond wheel
Dust collecting wheel guard
Dust cover attachment
14 ENGLISH