External Connections; Communication Interface Cable To I-Dt61Pw - OHAUS Defender 6000 Guia Del Usuario

EN-4
Numeric keyboard (i-DT61XWE)
Primary Function
(Short Press)
Secondary
Function
(Long Press)
Note: for i-DT61XWE model, press the Tare and CLR button together for three seconds can lock all buttons.
Preform the same procedure again can unlock all buttons. When all buttons are locked, the
2. INSTALLATION

2.1. External Connections

2.1.1. Scale Base with Connector
Ohaus bases with a connector can be attached to the external load cell connector. To make the connection, plug
the base connector onto the external load cell connector. Then rotate the base connector's locking ring clockwise.
2.1.2. Power input to i-DT61PW
Use 6 cells of D size dry batteries. During battery operation, the battery symbol indicates the battery status.
Battery 5%~25% remaining
Battery 25%~50% remaining
Battery 50%~75% remaining
Battery 75%~100% remaining
2.1.3. AC Power to i-DT61XWE
Connect the AC plug to an electrical outlet.

2.1.4. Communication Interface Cable to i-DT61PW

Attach the IR Communication cable (P/N: 30572910) to the indicator front panel, make sure the two holes in the
interface cable module match the two bolts which located in the front panel.
1-9 .
Enters numeric Enters decimal
values on the point (.) on the
display. display.
LIB
Searches library
items with numeric
keys.
Defender 6000 Indicators
0 CLR
Enters numeric Clears the entered
values 0 on the value.
display. Clears an existed
APW.
When the
accumulation data is
displayed, press to
clear them.
User +/-
Searches users Switches between
with numeric keys. positive and negative
value.
Figure 2-1
icon will be lighted.