Publicidad
Idiomas disponibles
Idiomas disponibles
1. Removal
Installation
1. Move the clutch cable boot.
2. Loosen the screw of balancer
with a + driver several turns
and pull the balancer assembly
out of the handlebars. (LH and
RH)
NOTE: Loosen the screw only
3. Remove the lever pivot bolt and
nut. (LH and RH)
NOTE: Disuse the removed lever
4. Loosen
adjuster nut and disconnect the
clutch cable.
5. Replace the Clutch Cable Boot
I.
enough to remove the bal-
ancer. Otherwise, the bal-
ancer may disassemble
and
some
components
may remain in the handle-
bar.
Disuse the removed screw.
pivot bolt.
the
clutch
Boot
Boot
Boot
Lever pivot bolt
Lever pivot bolt
Lever pivot bolt
cable
Clutch cable
Clutch cable
Clutch cable
GENUINE SUZUKI ACCESSORIES
3/5
Balancer
Balancer
Balancer
Screw
Screw
Screw
Nut
Nut
Nut
Publicidad
