Publicidad
Idiomas disponibles
Idiomas disponibles
6. Install the clutch cable and
adjust the clutch cable play.
7. Install the Lever Pivot Bolt (L)
E, (R) F, Washer H (LH only),
Spacer D (LH only) and the nut
(LH and RH) that was removed
step 1.
Tighten the Lever Pivot Bolt (L)
E, (R) F and nut to the speci-
fied torque. (LH and RH)
Lever Pivot Bolt
E :
6.5 N·m (0.65 kgf-m, 4.7 lbf-ft)
F :
6 N·m (0.6 kgf-m, 4.5 lbf-ft)
Lever Pivot nut:
5 N·m (0.5 kgf-m, 3.5 lbf-ft)
2. Installation of Knuckle Cover
1. Install the Washer G (LH only),
Knuckle Cover (L) A and (R)
B.
Clutch cable
Clutch cable
Clutch cable
GENUINE SUZUKI ACCESSORIES
4/5
Nut
Nut
Nut
Clutch lever
Brake Lever
Publicidad
