Sony RM-PJ1000 Manual Del Usuario página 16

Location and Function of Controls
4
RGB SHIFT key*
Enters the shift adjustment mode for the input signal. Next
adjust the position of the picture using the four arrow keys.
The picture shifts in the direction of the arrow on the
pressed key.
Press the MEMORY key 8 to store the adjusted value and
display the adjusted picture.
Note
Depending on the projector, this key functions only for
limited types of input signal.
5 RGB SIZE key*
Enters the size adjustment mode for the input signal. Next
adjust the size of the picture using the four arrow keys.
B to reduce horizontal size
b to expand horizontal size
V to expand vertical size
v to reduce vertical size
Press the MEMORY key 8 to store the adjusted value and
display the adjusted picture.
6 COMMAND ON/OFF switch
No keys except for the LIGHT button on the Remote
Commander function when this switch is set to OFF. This
saves battery power.
7
CENT R/B keys*
Enters the centering adjustment mode of the red and blue.
R: Press to enter the red centering adjustment mode.
B: Press to enter the blue centering adjustment mode.
Perform the centering adjustment using the four arrow keys.
8 MEMORY key*
Stores various settings and adjusted data into memory.
9 POWER ON/OFF key
Turns on and off the projector when the MAIN POWER
switch of the projector is ON.
! º Menu operation keys
Used for various adjustment functions and for menu
operations.
MENU: Displays the main menu. Press it again to turn off
the menu.
Arrow keys: Adjusts the value or selects the item in the
menu.
ENTER: Stores the settings in the menu.
! ¡ RESET key
Reset the adjusted levels to the initial setting levels, etc.
! ™ POSITION +/– keys*
Selects the position to be adjusted on the screen in the
blanking adjustment mode, etc.
RM-PJ1000. 3-858-586-02.J/E/F/G/S/I/C
16