Sony RM-PJ1000 Manual Del Usuario página 18

Location and Function of Controls
C: The signal input from the INPUT C connectors of the
projector
D: The signal input from the INPUT D connectors of the
projector
! • BLKG (blanking) adjustment key*
Enters the blanking adjustment mode.
! ª PATTERN key
Displays the internal test patterns of the projector. Each
press of the key advances the test pattern sequentially.
@ º NORMAL key
Cancels the test pattern or the adjustment mode.
@ ¡ MUTING keys*
PIC: Cuts off the picture. To restore the picture, press the
key again.
AUDIO: Cuts off the sound. To restore the previous sound
level, press the key again.
@ ™ LCD LENS CONTROL keys*
Adjusts the picture of the LCD projector, etc.: ZOOM,
SHIFT and FOCUS.
@ £ CONTROL S OUT jack
Connect the supplied remote control cable to this jack and to
the CONTROL S IN jack of the projector for wired remote
control operation.
When the Commander is connected to the CONTROL S IN/
PLUG IN POWER jack of the projector via the remote
control cable (stereo), the power for the Remote
Commander is supplied from the projector.
RM-PJ1000. 3-858-586-02.J/E/F/G/S/I/C
18