Battery Installation - Sony RM-PJ1000 Manual Del Usuario

Battery Installation

1
Push to open the lid.
2
Install three R6 (size AA) batteries with the polarities
correctly aligned.
Be sure to install
the battery from
the ' side.
3
Replace the lid.
Notes on batteries
• If the projector does not operate properly, the batteries
might be worn out. Replace all three of them with new
ones.
• To avoid damage from possible battery leakage, remove
the batteries when the Remote Commander will not be
used for a long time.
• The life of the batteries depends on frequency of Remote
Commander usage and how often you use the LIGHT
button. If they wear out quickly, replace them with new
alkaline batteries.
RM-PJ1000. 3-858-586-02.J/E/F/G/S/I/C
19