Sony RM-PJ1000 Manual Del Usuario página 17

Tabla de contenido

Publicidad

! £ PICTURE CONTROL keys
Adjusts the picture conditions: CONTR (contrast), BRIGHT
(brightness), COLOR, HUE and SHARP (sharpness).
! ¢ VOLUME +/– keys*
Adjusts volume.
+: to increase volume
–: to decrease volume
!
SWITCHER/INDEX select switch
Selects the function of the SWITCHER/INDEX keys.
Set to SWITCHER to select the input from the PC-1271
series signal interface switcher.
Set to INDEX to assign the index number of each projector
when multiple projectors are used.
! § SWITCHER/INDEX keys
When the SWITCHER/INDEX select switch is set to
SWITCHER
When the PC-1271 series switcher is connected to the
projector, press a number key (1 – 8) to select the input from
the switcher. Number key 9 does not function.
To select the input from the second switcher (when the
SINGLE/SECOND/OTHER switch on the switcher is set to
SECOND), press a number key between 1 and 8 within two
seconds after pressing the SECOND key.
When the SWITCHER/INDEX select switch is set to
INDEX
When multiple projectors are connected, select the index
number of the projector to be adjusted. Press number keys
(1- 9) to assign the index number and press the ENTER key.
Be sure to press the keys one after another within 2 seconds.
e.g. To select 1, press "0," "1" and "ENTER," or "1" and
"ENTER."
To select 12, press "1," "2" and "ENTER."
When adjusting all the projectors simultaneously, press the 0
(ALL) key and ENTER key.
Note
Depending on the projector, pressing "0" and "0" is not
effective.
! ¶ INPUT SELECT keys*
Selects the input signal.
VIDEO: The video signal input from the projector
SELECT (VIDEO/S VIDEO): Select the composite video
or S video signal input after pressing the VIDEO key.
Each press of the key changes the input signal.
A: The RGB, component or HDTV signal input from the
INPUT A connectors of the projector or the interface
board installed to the INPUT A block of the projector
B: The signal input from the INPUT B connectors of the
projector or the interface board installed to the INPUT
B block of the projector
RM-PJ1000. 3-858-586-02.J/E/F/G/S/I/C
17

Publicidad

Tabla de contenido
loading

Tabla de contenido