Sauder Cornerstone Serie Manual Del Usuario página 15

Step 11
Place a LEVELER BRACKET (M) over each hole in the
å
bottom edge of the END (A).
Use a hammer to drive a PROPEL NUT (N) through each
å
BRACKET and into the holes in the END. Now, turn a
LEVELER (L) into each of the PROPEL NUTS.
Fasten the CONNECTOR PLATE (I) to the TOP (C). Use
å
four BLACK 9/16" LARGE HEAD SCREWS (T).
Go to step 21 and continue assembly.
å
www.sauder.com/services
A
BLACK 9/16" LARGE HEAD SCREW
(4 used for the CONNECTOR PLATE)
L
N
M
C
T
404380
Return on the RIGHT
I
Page 15