Sauder Cornerstone Serie Manual Del Usuario página 6

Step 2
Fasten the CORNER BLOCKS (H) to the TOP (C). Tighten
å
two TWIST-LOCK® FASTENERS.
H
Flat surface
Page 6
How to use the SAUDER TWIST-LOCK
1. Insert the dowel end of the FASTENER into the hole of the
adjoining part.
NOTE: The dowel end of the FASTENER must remain fully
inserted in the hole of the adjoining part while locking
the FASTENER.
2. Tighten the FASTENER with a Phillips screwdriver as tight
as possible.
H
C
404380
®
FASTENER
www.sauder.com/services