Motor Operation - FAAC TM2 PP Traducción Del Manual Original

INSTRUCTIONS FOR USE
The motor is simple to install and easy to use, it does not need to be adjusted as it
automatically recognises the limit stops.
The roller shutter must be fitted with:
A - Rigid straps or anti-burglary springs
B - Fixed or removable safety plugs in the guides
It is recommended that you always check the strength of the shutter.

MOTOR OPERATION

STOP AT LIMIT STOP (OPENING
AND CLOSING)
Always travels as far as possible
TM2 PP
and then reverses slightly to
decrease the force.
When an obstacle is detected in one direction, movement is inhibited in that di-
rection. Operate the motor in the opposite direction to restore normal operation.
TM2 PP
A
9
B
OBSTACLE DETECTION DURING
VERTICAL MOVEMENT
Stops and reverses slightly to de-
crease the force.
A4518_6G82_Rev.A