Base Settings - Steren TEL-2485 Manual De Instrucciones

2. Display
a) Wallpaper. Modifies the wallpaper. Use
to select.
b) Backlight Time. Adjusts the backlight duration. You can choose between 10,
20, 30, 40, 50 or 60 seconds.
c) Handset Name. Lets you assign a name to the handset. Use the alphanumeric
keypad to enter the name. If you want to delete a character, press
to save your changes.

3. Base Settings

a) Dial Mode. Allows you to choose between tone or pulse dialing.
b) Recall. Modifies the flash time (special services). You can choose between
100, 120, 300, 600 or 1000 ms.
c) System PIN. The 4-digit PIN code allows you to modify certain parameters of
your phone. The default code is 0000 (four zeros). You can change this code to
protect the phone settings.
-Enter your default PIN (0000, four zeros).
-Enter the 4 digits of the new PIN and press
again .
to see each one and then press
. Re-enter the 4 digits and press
. Press
13 13