Device does not turn on.
♦
The integrated battery is not charged .
Charge the battery (see section Charging the speaker) .
No sound.
♦
The volume on the device or the playback device is set to mute .
Increase the volume on the device or on the playback device .
♦
Playback has not been started on the playback device . Start playback on
the playback device .
The two speakers will not connect to each other.
♦
The speakers are not in pairing mode . To change this, press and hold the
button and the
for about 2 seconds until you hear a beep . Wait a moment until the speak-
ers have connected to each other .
If you cannot solve the problem with the above-mentioned solutions, please
contact the service hotline (see Warranty section).
SKBL 56 A1
IB_282774_Bluetooth_SKBL56A1_LB9.indb 13
button (
)of one of the speakers
Cleaning
►
To avoid irreparable damage to the device, ensure that moisture cannot
penetrate the device during cleaning .
►
Do not use caustic, abrasive or solvent-based cleaning materials . These can
damage the surfaces of the device .
♦
Clean the housing of the device with a lightly moistened cloth and a mild
detergent only .
Storage when not in use
♦
Store the device in a location which is clean, dry, dust-free and not in direct
sunlight .
♦
To ensure long battery life, charge the battery at regular intervals .
13
■
US-EN
│
16.01.17 11:28