Eu / Uk Reception; Setting The Clock Manually - Oregon Scientific RM928N Manual De Instrucciones

To enable the reception again, hold the DOWN- / UP+ / MODE
switch in the UP+ position for 2 seconds. The Radio Reception
symbol will blink and the unit will search for the RF signal
automatically.

EU / UK RECEPTION

Your travel clock automatically synchronizes the current time
and date when it is brought within range of the radio signal
MSF60 generated from Rugby, England (UK) or DCF77
generated from Frankfurt, Germany (EU) for Central Europe.
You can choose between the two radio signals by switching the
EU/UK switch. You have to reset the unit by pressing RESET
after changing the radio signals.

SETTING THE CLOCK MANUALLY

To adjust the clock and settings manually without automatic RF
synchronization, remember to disable the Radio Reception
first. Press + or – on the Mode Switch to adjust the values of
each setting.
Diagram
7
Instructions
1. Press and hold the Mode Switch
for 2 seconds.
2. Adjust the time-zone for a 2
This will set the time and date for
the 2nd Time Display. Press
Mode Switch when done.
NOTE The 2 nd Time Display is
calculated using the time-zone
nd
offset. As such, this 2 time display
cannot be directly set like the
Normal time display.
3. Choose between 12-hour or 24-
hour time format. Press Mode Switch
when done.
4. Adjust the current hour. Press Mode
Switch when done.
5. Adjust the current minute. Press
Mode Switch when done.
6. Adjust the current year. Press Mode
Switch when done.
nd
city.