Publicidad
Pairing / Connection / Apareado
MPH
MPH
0,0
0,0
TRIP DIST 0
TRIP DIST 0
A
~20 sec
MPH
15,0
TRIP DIST 0
MPH
0,0
TRIP DIST 0
KMH
0,0
BC1106 DTS
15: 2 3
MPH
0,0
TRIP DIST 0
Pairing / Connection / Apareado
• After installing the bike computer into mounting bracket, SPEED display will
blink ZERO.
• There are two ways to pair your transmitter and computer.
• 1. Ride. After 20 seconds (max 5 min.) the receiver will pair with
transmitter and data will be displayed.
• 2. Spin front wheel until speed display stops blinking (A).
• After 5 min. without transmission, BC 1106 DTS will go into sleep mode.
(Time of Day and Model name shown in the display). Press any button to
re-activate the computer. A short pairing will find the transmitter.
• Removing the BC 1106 DTS from the mounting bracket will end the paired
connection.
• If "TOO MANY SIGNALS" message is displayed: lengthen the distance of all
transmitters and press any button to continue. Pairing will begin again.
Publicidad
