Battery Charge (External Battery Charger) - Pegasolift TPL 16 Guía Para El Uso Y El Mantenimiento

2
When the indicator of battery loading (2) has only a LED lightened it is necessary to load
the battery in the following way:
A) Disconnect the start contact (reference page 13 "Tiller head" n. 5) and the switch for
the battery disconnection (2) in this page.
B) Remove the battery cover; connect the battery plug (1) to the battery charger plug
(3).
C) Control that the battery charger indicator is lightened checking the button "STOP"
(7); connect the feeding socket (6) at a socket type "SCHUKO" of 220V 10 A
avoiding the use of electric adaptors.
D) Check on the display on LED (8) that the loading process has started.
Use the button "STOP" (7) only for disconnecting the device if the operator want
interrupt the charge of the battery.
The battery charge processing is composed by the following stages:
The battery charger is activated only when the feed socket is plugged in the mains. In
!
this stage the green LED is lighted.
After 8 seconds begins the loading stage which has a variable duration depending on
!
the installed battery; during this stage the green LED is lighten.
At the end of this stage starts the process of equalization, during this stage the green
!
LED is spent and the yellow one is lightened; the equalization operation is
indispensable for the charge of battery and shouldn't be interrupted.
If after 13 hours the rectifier is still in the loading stage, there is provided an automatic
blocking with the lightening of the red LED (marked with Tmax).
DANGER!
battery having moist clothes and/or metallic bracelets and
necklaces.
BATTERY CHARGE
5
3
6 1
4
It is strictly prohibited to execute any operation on the
.
45