SMA NR-STP150H-ACCON Manual De Instrucciones página 24

7 Installing the H-AC-CON
Position Designation
A SELV circuit
Procedure:
1. Check the SELV circuits for visible dirt before mounting the assembly. If dust or other deposits
cover the assembly, do not use it and contact the Service.
2. Check whether printed circuit board retaining clips
are in place at the appropriate positions in the
inverter. If any printed circuit board retaining clips
are missing, insert the supplied printed circuit board
retaining clips in these positions in the enclosure.
24 STPTL-30-H-AC-CON-RM-xx-10
A
SMA Solar Technology AG
Replacement Manual