Removing The H-Ac-Con - SMA NR-STP150H-ACCON Manual De Instrucciones

6 Removing the H-AC-CON

Damage to the inverter due to electrostatic discharge
Touching electronic components can cause damage to or destroy the inverter through
electrostatic discharge.
• Ground yourself before touching any component.
6 Removing the H-AC-CON
1. Ensure that the current parameter settings of the inverter are present.
2. Disconnect the inverter from all voltage sources (see Section 5, page 12).
3. Open the AC terminals and remove the insulated
conductors for L1, L2, L3, and N from the openings.
Ensure that the grounding conductor connection
remains in place.
4. Remove all connections on the H-AC-CON.
20 STPTL-30-H-AC-CON-RM-xx-10
NOTICE
SMA Solar Technology AG
Replacement Manual