10
Guide the securing strap (both sides) for the lower carrier pipe through the
latch (1) and tighten.
1
The clearance between the soft case and the main silencer should be at least
1 cm. If the clearance is less, adjust the silencer to obtain the minimum
clearance.
To adjust, loosen the screw on the fastening clamp and the screws on the
flange. Adjust the silencer so that the distance between the silencer and the
soft case is at least 1 cm and tighten the screws again.
Both halves of the rack system must be mounted at all times. Also
make sure the same type of case is mounted on both sides. Distribute
the weight evenly and do not exceed the maximum payload of 3 kg per
case. The vehicle is wider when cases are mounted on the rack system
which may change the vehicle's handling characteristics. The
recommended maximum speed with cases mounted is 130 KPH.