End Of Life / Disposal; Standards And Directives - MSA Gallet F2XR Manual De Instrucciones

GB
• In case of visible damage identified during the daily check (before or after use), such as impacts,
significant scratches, coating removal on the shell or visors, melted parts, broken parts, torn straps or
paddings, missing components, non-operational moving parts (such as visors or ratchet), etc., the
helmet should be taken to the trained maintenance technician or an MSA approved maintenance center
for complete control processing.
Failure to follow these warnings can result in serious personal injury or death.
6.4

End of Life / Disposal

The helmet must be treated as ordinary industrial waste/non-hazardous waste according to local regulations.
For further information contact MSA.
7 Certification and Approvals
The helmet meets the (EU) 2016/425 regulation and is certified according to the below standards.
The Declaration of Conformity can be found under the following link: https://MSAsafety.com/DoC.
APAVE Sudeurope SAS (0082), 8 rue Jean-Jacques Vernazza – ZAC.
Notified body for site
Saumaty-Séon – BP 193, 13322 Marseille Cedex 16, France
surveillance (module D):
7.1

Standards and Directives

WARNING!
The validity of the EU type-examination certificate might no longer be satisfied if a helmet marked as
conforming to this European Standard is fitted with another item of personal protective equipment or with an
accessory (other than as supplied by the helmet manufacturer for use with this helmet).
This helmet conforms to the retention requirements of this European Standard when the chin strap supplied
by the helmet manufacturer is worn and adjusted in accordance with these instructions.
Failure to follow this warning can result in serious personal injury or death.
Helmet
Standards, regulations and EU-
type examinations:
(EU) 2016/425
EN 12492:2012
EN 16471:2014
EN 16473:2014
EN 1385:2012
Ocular Visors
Standards, regulations and EU-
type examinations:
(EU) 2016/425
EN 14458:2018
7.2 Marking and Labeling
Helmet
Marking
EN 16471:2014, EN 16473:2014, EN 12492:2012 Reference to applicable standards
MSA
Date
Gallet F2XR
Certified by FINANCIERE POURQUERY (2789), 2, Espace Henry
Vallée, 69 007 Lyon, France
Personal protection equipment regulation
Mountaineering equipment - Helmets for mountaineers
Helmets for wildland fire fighting
Helmets for technical rescue
Helmets for canoeing and white water sports
ALIENOR CERTIFICATION (2754), 21, rue Albert Einstein ZA du
Sanital, 86100 Chatellerault, France
Personal protection equipment regulation
Personal eye equipment
Information
Identification of the manufacturer
Month/Year of production
Helmet model identification
7 Certification and Approvals
15