MSA Gallet F2XR Manual De Instrucciones página 7

GB
3.2 Advanced Adjustments
The following adjustments can be used to optimize wearing and comfort of the helmet after an initial
assessment. They should be performed if the basic adjustments do not enable a comfortable fit and must be
performed without wearing the helmet. Basic adjustments may need slight changes after advanced
adjustments are completed.
3.2.1 Ride Height Adjustment
The suspension position in the helmet shell can be adjusted to modify ride height (3 positions), depending on
wearer's head size and shape.
(1) Close the chinstrap buckle (if not
possible, loosen the adjustment).
(2) Tighten the side and rear adjustments
to achieve a tight, yet comfortable fit
(ear should be comfortable).
(3) Complete the adjustment with the
chinstrap adjustment.
(1) Unlock the 3 yellow tabs (left, right, rear) by
pulling them forward and down
(2) Adjust the suspension depth (left, right, rear) to
the most comfortable ride height. Ensure all
tabs are positioned at the same depth.
– A : for smaller head size
– C : for larger head size
(3) Lock the yellow tabs by pulling them forward
and up.
3 Use and Adjustment
7